The Universal Automatic Sharpening Machine for Service and Manufacturing of Diamond Tools and Saws

The »Dia-2100-classic« Edition 2005 was developped as an universal automatic  sharpening machine for production and service.

The »Dia-2100-classic« Edition 2005 fulfills all requirements for the sharpening of diamond tools for wood, plastics, circuit boards and laminate flooring presently on the market.

LACH DIAMANT, like no other manufacturer, can look back at more than 30 years of experience (since 1973) in the development and manu - facturing of polycrystalline diamond tools (PCD).

The »Dia-2100-classic« Edition 2005 can be easily operated without special programming knowledge, suited also for newcomers in the service / sharpening business as well as for production.

The »Dia-2100-classic« Edition 2005 has an active menu guide at the monitor based on Microsoft Windows®, supported by graphic depictions and video presentations. With this, an assured operating sequence, starting with the set-up of the machine, selection and measuring of the specific tools, sharpening process and final control is given.

In addition, the »Dia-2100-classic« Edition 2005 can be connected to the newly developped »dia-ToolNet« which allows the measured tools and their stored data to be externally recalled from the »dia-ToolNet« station.

The »Dia-2100-classic« Edition 2005 has been equipped with the further developped spark generator EDGplus. Surface qualities, depending on PCD quality, of Ra = 0.2 μ and better, are obtained with copper or the easier to handle and less expensive electrographite discs.

The »Dia-2100-classic« Edition 2005 can be equipped with either single or multiple tools and is also suited for sharpening operaton.

The »Dia-2100-classic« Edition 2005 is universally designed so that it is capable of all types of operations regardless if they involve shear angled jointers, bits or router bits, profile tools, grooving tools, scoring tools, hoggers or saws (for example see images at the top).

The programmes included in delivery allow multiple manufacturing in one spindle set-up, such as hogging heads or saws up to Ø 800 mm, scoring (also for circuit board processing PCB), sheer angled jointing cutters, etc.

The handling system »ecomat« for series production and service of diamond routers is offered as an option for subsequent installation.