Sawing with LACH DIAMOND sawblades
	Division of the base materials FR 2 + FR 4 (hard- or phenol paper respectively made of "epoxydglass"), all types of circuit board materials coated on one or two sides. Extended operating cycles, high economy of operation, minimal breakage of teeth through special soldering technology, minimal burrs due to the extensive tool life and operating cycles of the polished diamond cutting edges. Standard tooling is available from stock. For Sales and Customer Service please call 1-800-LACH USA.
	Order-No. Ø mm kerf d mm teeth 7511 275 3,5 d * 36 7513 325 3,6 d * 48 7515 375 4,0 d * 54 7517 400 4,4 d * 60 * With your order please state diameter of bore and the machine type.

Edge - Milling and polishing with LACH DIAMOND profile edge milling cutters
Burr-free laminates and clean profile edge, extended operating cycles, high economy of operation, more resharpening possibili- ties through LACH DIAMOND know-how. Standard tooling is available from stock. For Sales and Customer Service please call 1-800-LACH USA.
Order-No. Ø mm kerf d mm teeth 7521 83 6,5 25,4 3 7522 83 6,5 25,4 6 7525 160 8 80 18 7526 160 8 30 18

Multi-layer - Milling

Grooving/Scoring

Address

LACH-DIAMOND - Express Repair Service for all Types of Diamond Tooling